Russell Hobbs BRITA Instrucciones página 3

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
diagrams
1 BRITA® Memo
2 lid
3 lid release
4 lift here
5 clips
6 latch
7 ring-pull
8 BRITA® MAXTRA filter cartridge
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance must only be used by or under the supervision of a responsible adult. Use and
store the appliance out of reach of children.
2 Don't put the kettle, stand, cable, or plug in any liquid; don't use the kettle in a
bathroom, near water, or outdoors.
3 Keep the kettle, stand, and cable away from the edges of worktops and out of reach of
children.
4 Don't use the kettle without fitting both the mesh filter and the filter cartridge, otherwise it
might spit boiling water.
5 Put the stand on a stable, level surface.
6 Unplug the stand when not in use, before moving and before cleaning.
7 Don't use the kettle for any purpose other than heating water.
8 Use the kettle only with the stand supplied (and vice versa).
9 Use only BRITA® MAXTRA filter cartridges.
10 This appliance must not be operated by an external timer or remote control system.
11 Don't operate the appliance if it's damaged or malfunctions.
12 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
F BRITA® MAXTRA FILTER CARTRIDGE
• The filter cartridge contains ion exchange resin and activated carbon.
• Reduces limescale and substances, eg. chlorine, that affect taste and odour.
• Reducing the impurities makes the water look and taste better, and the reduction in
limescale helps your kettle too.
, Remember – water is a food, it goes off. Use filtered water within two days.
U BEFORE USING FOR THE FIRST TIME
• Pull the lid release up, to open the lid.
• Remove the filter cartridge from inside the kettle, and jump to point 3 below.
F PREPARING THE FILTER CARTRIDGE
1 Pull the lid release up, to open the lid.
2 To remove a used filter cartridge, hold the filter cartridge firmly with one hand, grip the
ring-pull with the other hand, and pull the filter cartridge up and out.
3 Remove all packaging from the new filter cartridge.
4 Don't worry if the inside of the packaging is damp – it's just condensation.
5 There might be black carbon particles in the packaging or on the filter cartridge. Don't worry,
they're harmless.
6 To ensure efficient operation, all air must be removed from the filter cartridge.
9 slots
10 funnel
11 flat
12 hook
13 mesh filter
14 tab
15 grip
16 spout
17 handle
household use only
3
0 off
18 switch
1 on
19 light
20 stand
21 screwdriver
22 notch

Publicidad

Tabla de contenido
loading

Tabla de contenido