Operation and use
1. Installation of the transmitter
1.The transmitter can use built-in microphone or external
microphone to record; as the following figure shows:
2.Insert the plug of the external microphone into the "
socket of the transmitter. Note that the insertion is in place, as
shown in the picture below.
3.Clip the back of the transmitter onto your clothes.
4
Operation and use
2. Installation of the receiver
1. Install the listening device and recording device according
to the corresponding interface, as shown in the picture below.
"
2. The receiver is installed on the camera for use, as shown in
the picture below.
5