Cleaning And Storage - Hoberg 07660 Manual Del Usuario

3. Attach the small metal plates (3) inside the window frame
(Picture C):
– stick 2 small metal plates into each of the corners of
the frame,
– depending on the window size also stick up to 3 small
metal plates in the middle of the window frame.
4. Place the magnetic holders (2) with the magnets onto
the small metal plates which are attached to the window
frame (Picture D).
5. Hold the mosquito net on a magnetic holder and press
the pins through the mesh of the net (Picture E).
6. Repeat this process on all magnetic holders.
Hint: Start by sticking the mosquito net to the top corners
of the frame. The mosquito net should fi t inside the frame.
Make sure that the mosquito net fi ts on all magnetic holders,
is taut and does not have any creases in it.
7. Then place the sealing pieces (1) onto the magnetic
holders and press them on fi rmly (Picture F). They must
engage audibly. When you do this, make sure that the
mosquito net does not slip. Hint: You can retighten the
mosquito net a little by moving the magnetic holders on
the metal plates a little.
The mosquito net can then simply be removed with the aid
of the magnets and inserted back inside the window frame.

Cleaning and Storage

• If necessary, wipe the mosquito net with a damp cloth
and mild cleaning agent if required.
• When the product is not being used, store it in a dry
place out of the reach of children and animals.
EN
9