Rinsing The Machine/Inner Circuits - MITACA ESPRESSO MACHINE Instrucciones De Uso

Starting up/heating
• Use only capsules specifically intended for this
model
• Connect the machine by inserting the plug in the
power socket.
• Switch on the machine with the main switch
(2).(Fig.8)
• The control buttons will start to blink slowly; once
they reach the temperature, the buttons will light up
with a fixed light, indicating that the machine is ready
for use.

Rinsing the machine/inner circuits

The machine should be rinsed both at its very first use
and when it has been inoperative for a long spell of
time. By performing this quick procedure, you will
ensure that all inner circuits are rinsed.
• Close the small cup support (10) and place a
large cup on the grid (5)
(Fig. 9)
• To rinse the coffee unit press button (D).
• To rinse the milk circuit, hold down button (B) for
2 seconds.(Fig. 10)
N.B.
Flush out the milk circuit every evening.
Fig. 8
10
Fig. 9
Fig. 10
23
2
B
D
5