Installation Procedure - Chevrolet Performance 19299069 Guia De Inicio Rapido

Installation Procedure:

The figure below shows the accessory drive package installed on a typical
small block application. Refer to this picture and following pictures for clarification
during the installation of the various components included in this package.
FIGURE 1
1. Install stud, part number (12556447) per Figure 2 below:
FIGURE 2
12556447
2. Attach the Air Conditioning (A/C) compressor bracket
(12569286) to the engine with bolt (11515768). Orient the
bracket as shown in Figure 3 below:
Corvette A/C Add-On Accessory Drive Package Rev
TITLE
FIGURE 3
12569286
3. Install A/C compressor (89019337) with nut (15709703) and
bolts (11516360), (11098341) and (12552922) per Figure 4
below:
FIGURE 4
15709703
12552922
4. Install A/C belt tensioner (12595289) and belt (12636225) per
Figure 5 below:
FIGURE 5
12636225
12595289
19299071
20FE12
PART NO.
11515768
11516360
89019337
11098341
2
SHEET
6
OF