HAMPTON BAY 718212230862 Manual De Instrucciones página 4

PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
2 Screws (#3)
ASSEMBLY INSTRUCTIONS:
1. Shut off power at the fuse box or circuit breaker box, if necessary remove old
fixture and all mounting hardware from outlet box.
2. Carefully unpack your new fixture and lay out all the parts on a clear area, Take
care not to lose any small parts necessary for installation.
3. Unscrew the 2 pieces of Screws (#3) and take off the Top Cover (#2).
4. Install light bulbs in accordance with the fixtures specifications. (DO NOT
EXCEED THE MAXIMUM WATTAGE RATING!!)
5. Put back the Top cover (#2) onto the Fixture Frame (#4) and secure by the 2
pieces of Screws (#3).
Page 4