Jasco myTOUCH SMART Guia De Inicio Rapido

Indoor Digital
Simple Set
In-Wall Timer
Fast, easy setup!
1. After installation
For first use, use a pencil or toothpick to press
the reset button ( r ) below the arrow buttons.
2. Set the time
Use up ( ) and
down ( ) arrows
to set current time.
3. Choose your program
There are 3
pre-programmed times
that run individually or
simultaneously. Choose
from the following:
"morning" (5am-8am)
"evening" (5pm-12 am)
"all night" (6pm-6am).
When a time is chosen,
the blue LED indicator
light will turn on. You
may run multiple programs.
WARNING
RISK OF ELECTRIC SHOCK
• SHUT OFF POWER AT FUSE BOX
OR CIRCUIT BREAKER BEFORE
INSTALLATION
• DO NOT USE IN WET LOCATIONS
• USE INDOORS ONLY
RISK OF FIRE
• DO NOT USE TO CONTROL APPLIANCES
THAT CONTAIN HEATING ELEMENTS
(COOKING APPLIANCES, HEATERS,
IRONS, ETC.)
• DO NOT EXCEED ELECTRICAL RATINGS
• USE COPPER WIRE ONLY WITH THIS
DEVICE
• DO NOT USE TO CONTROL
RECEPTACLES
MADE IN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 1-year limited warranty.
Visit www.byjasco.com for warranty details.
Questions? Contact us at 1-800-654-8483 between 7:00AM–8:00PM CST.
Additional features:
Countdown
•
This feature turns the
light on for a set period
of time and turns it off
when time expires.
Press "countdown,"
then use up ( ) and
down ( ) arrows to
set from 1 minute to
24 hours. Once you
reach your desired time
setting, simply walk
away and the timer will begin
counting down. Your last time
setting will be remembered the
next time you use the countdown feature.
Manual/Override
•
Manual: Press and
buttons to manually
control lighting.
Note: When daylight
savings time occurs,
use the up ( ) and
down ( ) arrows to adjust the time by 1 hour.
25055-P1 Manual v1 10/14/16