Red Jacket Water Products Limited Warranty - ITT Industries Red Jacket RCP Manual De Instalación Y Funcionamiento

Tabla de contenido

Idiomas disponibles

RED JACKET

Water Products

This warranty applies to all water systems pumps manufactured by Red Jacket Water Products.

Any part or parts found to be defective within the warranty period shall be replaced at no charge to the dealer during the warranty period. The warranty period shall

exist for a period of twelve (12) months from date of installation or eighteen (18) months from date of manufacture, whichever period is shorter.

Red Jacket Water Products (the manufacturer) warrants to the original end-user Purchaser of each of the Manufacturer's Red Jacket Waterbear, Grizzly and Enduro

submersible pumps that any part thereof which proves to be defective in material or workmanship within 36 months from manufacture date will be replaced at no

charge with a new or re-manufactured part, F.O.B. factory. In the case of the Big-Flo submersible pump and motor unit and all jet and centrifugal pumps, however, the

warranty period shall be the earlier of 24 months from the date of manufacture or 12 months from the date of installation.

A dealer who believes that a warranty claim exists must contact the authorized Red Jacket Water Products distributor from whom the pump was purchased and furnish

complete details regarding the claim. The distributor is authorized to adjust any warranty claims utilizing the Red Jacket Water Products Customer Service Department.

The warranty excludes:

(a) Labor, transportation and related costs incurred by the dealer;

(b) Reinstallation costs of repaired equipment;

(d) Consequential damages of any kind; and,

(e) Reimbursement for loss caused by interruption of service.

For purposes of this warranty, the following terms have these definitions:

(1) "Distributor" means any individual, partnership, corporation, association, or other legal relationship that stands between Red Jacket Water Products and the dealer

in purchases, consignments or contracts for sale of the subject pumps.

(2) "Dealer" means any individual, partnership, corporation, association, or other legal relationship which engages in the business of selling or leasing pumps to

customers.

(3) "Customer" means any entity who buys or leases the subject pumps from a dealer. The "customer" may mean an individual, partnership, corporation, limited

liability company, association or other legal entity which may engage in any type of business.

Red Jacket Water Products is a licensed trademark.

The ITT Engineered Blocks symbol is a registered

trademark and tradename of ITT Industries.

Red Jacket Water Products reserves the right to make design improve-

ments and pricing modifications as necessary and without notice.

Printed in U.S.A.