I.introduction; Ii.specification - koban KMH-01 Manual De Instrucciones

I.Introduction

KMH-01 Contact resistance instrument is a carefully developed high precision,
digital switch detection instrument by the IEC standard And PRC's Latest electric
power execution standard DL/T845.4-2004 Regulations. The Instrument adopt High
frequency high power constant current switching power supply technology to detect
the Micro ohm contact resistance. The Instrument is widely used for varieties of the
switches and Contact resistance of switches and electrical appliances, contact
resistance and Power cables, contact resistance of welding seam detection.
The measurement data is accurate and correct, high stability and satisfy the
requirements of Power, power supply department on-site high-voltage switch repair
and high voltage switch factory contact resistance test. Output current and
measurement resistance output at the same time in the 7-inch high brightness
touch color liquid crystal, measurement results can be stored on the U disk, power
off storage can meet the data query at any time.

II.Specification

1. The instrument can be controlled by the whole process of the instrument through the
special software of the mobile phone, and the test data can be stored in a fixed
format on the mobile phone, so as to facilitate data query at any time.
2. It has a variety of protective functions, such as reverse potential impact, disconnection,
power failure and overheat during the test, which can reliably protect the impact of
reverse potential on the instrument and give synchronous sound alarm.
3. Intelligent power management technology, the instrument always works in the
minimum power state, effectively saving energy and reducing heat.
4. Output high voltage, measurement range is wide.
1