Iv.instrument Operation Function - koban KMH-01 Manual De Instrucciones

EN

IV.Instrument Operation Function

1.Power switch: Press T to supply power, press O to cut off power supply.
2.Power input terminal, adopt AC 220V power supply.
3.I+、 I- :Current output terminal, supply the constant current to the tested
object by special testing wire.
4. V+、V- ： Input voltage terminal for tested object.
5. LCD: 320X240 true color LCD, under the bright, font can also be clearly
observed, display operation settings, test results, contact resistance value and
output current value.
6. RS232: Serial port.
7. : Ground terminal.
8. USB: U disk storage connector.
9. Printer: Thermal printer, prints the testing results.
Low resistance meter
3
KMH-01