AKG Acoustics HSC 171 HSC 271 HSD 171 Modo De Empleo página 19

2. Wash the windscreen in soap suds.
3. Allow the windscreen to dry overnight.
4. Slide the windscreen onto the microphone capsule.
5. Pull the windscreen over the outer edge of the microphone capsule.
Microphone
Type:
Polar pattern:
Frequency range:
Sensitivity:
Max. SPL for 1% THD:
Equivalent noise level:
Signal/noise ratio (A-weighted):
Electrical impedance:
Recommended load impedance:
Power requirement:
Current consumption:
Headphones
Type:
Sensitivity:
Frequency range:
Power rating:
Rated impedance:
THD:
System
Connector:
Cable:
Finish:
Weight:
HSC 171/271, HSD 171/271/Single
HSC 171
prepolarized condenser micro-
phone
cardioid
20 Hz to 20 kHz
25 mV/Pa
126 dB
22 dB(A)
72 dB
≤200 ohms
≥2000 ohms
9 to 52 V phantom power
≤2 mA
closed-back, supraaural
dynamic headphones
94 dB SPL/mW
18 Hz to 26 kHz
200 mW
55 ohms
<0.4%
6-pin mini XLR connector
2 x 3-conductor; separable;
10 ft. (3 m) long; coiled section;
with 6-pin female mini XLR
connector, 1/4" TRS jack plug
(headphones), and 3-pin XLR
connector w/integrated
HSC-PA phantom power
adapter (microphone)
matte black
250 g (8.8 oz.)
5 Cleaning
6 Specifications
HSC 271
prepolarized condenser micro-
phone
cardioid
20 Hz to 20 kHz
25 mV/Pa
126 dB
22 dB(A)
72 dB
≤200 ohms
≥2000 ohms
9 to 52 V phantom power
≤2 mA
closed-back, circumaural
dynamic headphones
94 dB SPL/mW
16 Hz to 28 kHz
200 mW
55 ohms
<0.3%
6-pin mini XLR connector
2 x 3-conductor; separable;
10 ft. (3 m) long; coiled section;
with 6-pin female mini XLR
connector, 1/4" TRS jack plug
(headphones), and 3-pin XLR
connector w/integrated
HSC-PA phantom power
adapter (microphone)
matte black
300 g (10.6 oz.)
19