RiverRidge Danbury Instrucciones De Ensamblaje página 10

STEP 5
E
E
G
1. Attach 2 hinges (G) to right door (7) by inserting 4 screws (E) through holes on hinges (G),
then tighten to right door (7).
2. Attach 1 magnet plate (J) to right door (7) by inserting 1 screw (E) through hole on magnet
plate (J), then tighten to right door (7).
3. Repeat above steps to assemble another 2 hinges (G) and another magnet plate (J) to
left door (6).
STEP 6
Q/R
1. Attach left door (6) to left side panel (2) by inserting 4 screws (E) through holes on hinges (G),
then tighten to left side panel (2).
2. Attach knob (Q/R) to left door (6) by inserting 1 machine screw (H) through hole on left door (6),
then tighten to knob (Q/R).
3. Attach right door (7) to right side panel (3) by inserting 4 screws (E) through holes on hinges (G),
then tighten to right side panel (3).
4. Attach knob (Q/R) to right door (7) by inserting 1 machine screw (H) through hole on right
door (7), then tighten to knob (Q/R).
J
7
E
E
G
E
E
3
E
H
E
6
E
E
J
6
E
Q/R
E
7
E
E
E
G
H
H
Q/R
E
E
E
E
G