RiverRidge Danbury Instrucciones De Ensamblaje página 9

STEP 3
B
1. Screw 4 cam bolts (B) into cam bolt holes on top board (1).
2. Attach magnet (L) to top board (1) by inserting 2 screws (C) through holes on magnet (L),
then tighten to top board (1).
3. Attach 2 adjustable anchor brackets (P) to top board (1) by inserting 2 screws (K) though
holes on adjustable anchor brackets (P), then tighten to top board (1).
STEP 4
1. Insert 4 wood dowels (A) into wood dowel holes on top board (1).
2. Attach top board (1) to left side panel (2) and right side panel (3) by inserting wood dowels
into wood dowel holes and inserting cam bolts into cam lock holes on left side panel (2) and
right side panel (3).
3. Insert 4 cam locks (D) into cam lock holes on left side panel (2) and right side panel (3), then
rotate clockwise to secure cam bolts (B) in place.
B
B
B
1
A
D
2
1
A
A
A
D
D
D
3
K
K
P
P
1
C
C
L