High Temperature Alarm; Error Indication - Haier H3F-280SAAU1 Serie Manual Del Usuario

5 - Use
EN
In the Fridge mode, FresherZone works as QUICKCOOL, the entire zone can be quickly
cooled to the freezing temperature.
When temperature is set at 4°C, touch FresherZone button (F), the FresherZone
indicator(f) illuminates, then the FresherZone function is activated. When activated, the
functions will be automatically deactivated when temperature is reached or after 3 hours.
Repeat the operation to deactivate manually.
Deactivate FresherZone before switching from freezer to fridge temperature, or swit-
ching from fridge to freezer temperature.
5.10 Eco mode (-16°C) (B)
When display is unlocked, by touching (-16°C) (B) the appliance is set into Eco mode. In
this mode the energy consumption is lower, while apropriate freezing performance is still
guaranteed. To exit the Eco mode select other temperature.
5.11 Power-off memory
This freezer has power-off memory, settings before power-off will be memorized. When
power is back on, freezer will return to settings before power-off and continue to function.
Child lock is not memorized, after power back on, display is unlocked.
5.12 Door open alarm
When freezer is kept open for more than 1 minute, beeper will make 3 beeps with inter-
val of 0.5 second. The beeps will be repeated every 30 seconds if door is kept open. The
beeps will stop until door is closed or after 7 mins of door opening. The beeper stops bee-
ping and freezer light goes off.

5.13 High temperature alarm

This freezer is equipped with high temperature alarm. In freeze mode or super freeze
mode, if current temperature setting indicator blinks with beeps, touch any button, the
beep will stop, but current temperature setting indicator keeps blinking, that means tem-
perature in the freezer is too high. Please check if freezer door is tightly closed or if large
amount of warm food is put inside the freezer. After a period, current temperature indi-
cator will stop blinking. If it does not stop blinking for a long period, and beeps that are
manually cancelled come back, please contact aftersales service.

5.14 Error indication

This freezer is equipped with error indication. When an error is encountered, display will
blink every 1/4 second different codes for different errors. In this situation, the freezer
could still freeze but user should contact aftersales service as soon as possible for optimal
control of the freezer.
5.15 Wi-Fi
When the appliance is connected with Wi-Fi, it could be controlled from distant [tempe-
rature setting adjustment, activation and deactivation of super freeze and FresherZone
function]. When the door is left open or when there is temperature deviation, real time
information could be informed through the application.
13