ASROCK Z270 Killer SLI/ac Manual Del Usuario página 13

• CPU / Chassis / Chassis Optional/Water Pump temperature
Hardware
Monitor
• CPU / Chassis / Chassis Optional/Water Pump Fan Tachom-
• CPU / Chassis / Chassis Optional/Water Pump Quiet Fan
• CPU / Chassis / Chassis Optional/Water Pump Fan multi-
• CASE OPEN detection
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,
• Microsoft® Windows® 10 64-bit (For 7
OS
• Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-
* To install Windows® 7 OS, a modified installation disk with
xHCI drivers packed into the ISO file is required. Please refer to
page 169 for more detailed instructions.
* For the updated Windows® 10 driver, please visit ASRock's
website for details: http://www.asrock.com
• FCC, CE, WHQL, RCM, BSMI
Certifica-
• ErP/EuP ready (ErP/EuP ready power supply is required)
tions
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may affect your system's stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
overclocking.
sensing
eter
(Auto adjust chassis fan speed by CPU temperature)
speed control
VPP, PCH 1.0V, VCCIO, VCCSA, VCCST
th
bit (For 6 Gen Intel® CPU)
Z270 Killer SLI/ac / Z270 Killer SLI
th
Gen Intel® CPU)
11