ASROCK Z270 Killer SLI/ac Manual Del Usuario página 7

* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status Description
Off No Link
Blinking Data Activity
On Link
** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output Front Speaker
Channels (No. 7)
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the
front panel audio header. After restarting your computer, you will find the "Mixer"
tool on your system. Please select "Mixer ToolBox"
multi-streaming", and click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then
you are allowed to select "Realtek HDA Primary output" to use the Rear Speaker,
Central/Bass, and Front Speaker, or select "Realtek HDA Audio 2nd output" to use
the front panel audio.
Speed LED
Status
Off
Orange
Green
Rear Speaker
(No. 5)
V --
V V
V V
V V
Z270 Killer SLI/ac / Z270 Killer SLI
Description
10Mbps connection
100Mbps connection
1Gbps connection
Central / Bass Line In
(No. 4) (No. 6)
--
--
V
V
, click "Enable playback
--
--
--
V
5