STAR Water Systems HSP10P1 Manual Del Usuario página 19

PUMP PRIMING AND STARTUP
4. Replace air relief plug and continue adding
water to pump cavity until water comes out of
the open outlet pipe at the open union.
5. Wait 10 minutes to see if water level drops
below the pipe tee. If level drops, check foot
valve. If level stays constant, replace the
priming plug.
6. Reconnect 1-1/2 in. union on outlet pipe.
Open the ball valve (turn handle to line up
with pipe), and then turn on breaker to start
pump.
4
Air Relief
Plug
5
Priming Plug with
Pressure Gauge
Water
Level
6
Closed
Open
19
Open Union
Outlet Pipe
Pipe Tee
Pipe Tee
IL1288