Tabla de contenido
Publicidad
ENGLISH
Installation Instructions
⚠CAUTION! Before beginning the installation please read the
accompanying documentation carefully and completely. Failure
to follow recommended procedures could lead to malfunction,
danger to your life or violation of the law. Allterco Robotics is not
responsible for any loss or damage in case of incorrect installation
or operation of this device.
⚠CAUTION! Do not allow children to play with the device, espe-
cially with the Power Button. Keep the devices for remote control of
Shelly (mobile phones, tablets, PCs) away from children.
How to assemble and mount the Shelly Motion
1. In your package as seen in fig. 1 you will find the body of the
Shelly Motion, ball arm plate and wall plate.
2. Place the ball arm plate onto the body of Shelly Motion as seen
in fig. 2.
3. Twist the ball arm plate in clock-wise direction as seen in fig. 3.
4. Place the wall plate onto the ball arm plate - fig. 4.
5. The assembled Shelly Motion sensor should look like fig. 5.
6. Use the locking dowel provided in this package to mount your
Shelly Motion on to the wall.
Shelly Motion area of detection
Shelly Motion has range of 8m or 25ft. Optimal height for mount-
ing is between 2,2m/7,2ft and 2,5m/8,2ft.
7
User and Safety guide EN
Publicidad
Tabla de contenido
