VITO PRO-POWER VIBE850 Manual De Instrucciones página 11

EN
PUT | CHANGING DRILLS
(FIG.5)
WARNING
Always disconnect the current drill
before making any charges.
The bushing fitting can be used with
drills to 13mm in diameter.
To open, fast to the bottom of the
bushing fitting and rotate the top
clockwise to open, enough to put
the drill.
To hold the drill steady and the
bottom of the bushing fitting and
rotate the top clockwise clock.
PUTTING THE AUXILIARY
HANDLE (FIG. 6)
1. Move the Auxiliary Handle (1) the
narrow part of the Drill (2) on the
front.
2. Turn the handle to the desired
position and secure it by turning
the handle (3) in the direction
of clockwise. 3. Turn the handle
clockwise to clockwise to remove
the handle.
The handle can be adjusted
NOTE:
for Right hand or Left.
DEPTH (FIG. 7)
1. Remove the Auxiliary Handle (1)
and set the Depth (2), with the
scale facing out.
2. Set the meter to the desired
measure. Turn the handle to adjust
(1).
MAINTENANCE
1 clean the drill after each use.
2 keep fit bushing always clean, dry
and free of any debris.
3 store it in a safe and dry place,
away from children.
4 if the drill is too slow or working
with a different, perhaps to change
the brushes. Must be changed by a
qualified person.
DECLARATION
OF CONFORMITY
We declare under our exclusive
responsibility, that the product
VIBE850 - IMPACT DRILL,
meets the following standards
or standardization documents:
EN 60745-1, EN 60745-2-
1,EN 55014-1, EN55014-2, EN
61000-3-2, EN61000-3-3, EK9-
BE-87:2014, EK9-BE-88:2014,
AfPS GS 2014:01 PAK, according
to the determinations of the
directives:
2006/42/EC - Machinery
Directive;
2014/30/EU - Electromágnetic
Compatibility Directive;
2011/65/EU - RoHS Directive;
2000/14/EC - Sond power level
guaranteed: 105 dB.
S. João de Ver,
15/05/2017
Central Lobão S. A.
Responsible for the Technical File
WARRANTY TERMS
The warranty of this compressor
is two years from the date of
purchase. You should, therefore,
keep your proof of purchase during
this period of time. The warranty
covers any manufacturing defect
in material or operating, as well
as parts and work needed for
their recovery.Excluded from
the warranty the misuse of the
17
product, any repairs carried out by
unauthorized persons (outside the
service center of the brand VITO)
as well as any damage caused by
the use of it.
11