USB
Instead of batteries, the voice recorder can work on USB power too, but there
won´t be audio output.
-Connect the USB jack with a USB cable to a PC, but there won´t be audio
output.
-Slide the battery switch on the side to BATT ON.
-Press
for a few seconds until the voice recorder is in normal operating mode.
3. HOW TO USE
Before you begin:
1. Set the date and time (See page 18)
2. Choose the quality of the recordings (See page 22)
3. Choose a recording source (See page 22)
RECORDING
1) Microphone recording
-Press M for few seconds, move through the menu with +/-, choose
"Record from", press M and select "Microphone".
9 9