Product Set Up; Product Use - auna mixx carry cot Manual Del Usuario

Product Set Up

1
Please ensure that both attachment mounts, located on the
sides, are securely attached. (1)(2)(3)
To release the attachment mounts, please see image (4)
2
Please ensure the 2 support mounts are securely attached.
(5)(6)
To release the support mounts, please see image (7).
3
Place the inner mattress inside the frame and zip the
zipper. (8)(9)
4
Pull up the canopy as illustrated while pressing the buttons
on both sides. (10)
5
Check to make sure the handle is secure before placing the
child in the carry cot. (11)-1
Please make sure that the handle is in the correct position
of use before carrying or lifting.
6
Always use the mattress when using the carry cot. (12)(13)
Mattress cover can easily be removed to wash.
7
Assemble the carry cot cover and shade panel as shown in
(14)(15).

Product Use

Canopy
1
Pull the dream drape TM out from under the carry cot
canopy, then secure it to the two sides of carry cot with
magnets. (16)(17)
2
Fold the rear panel of the canopy up, and the rear panel of
the carry cot down for more ventilation. (18)
9 MIXX carry cot instructions
Carry Cot Attachment on Stroller Frame
1
Place the carry cot directly down until it latches into place.
(19)
2
The carry cot is securely attached with a positive "click".
(20)
Always remove the stroller seat before using the carry cot.
Please do not fold the stroller when the carry cot is still
attached.
3
The carry cot can be used with the MIXX series strollers.
Carry Cot Removal
Press each release side button as shown (21), while lifting up
the handle simultaneously.
Rain Cover
To assemble the carry cot rain cover, place it over the carry
cot, and attach the hook and loop fasteners on the front of rain
cover. (22)
Please always check ventilation, especially in hot weather
when the rain cover is on the product.
Please check that the rain cover has been cleaned and dried
before folding.
MIXX carry cot instructions 10