Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MOTION DETECTION
If your dash camera is ON, but not recording, having this feature set to ON
will allow the camera to automa�cally start recording if any mo�on is
detected in the camera's view. Once this feature is ON, you must cover the
camera lens (so it will no longer see mo�on). You then can enter into
se�ngs and turn the feature OFF. You may also remove the SD card to
access se�ngs, to turn feature OFF.
NOTE: Camera must have power going to it for this feature to work
properly.
AUTO RECORD
Auto record allows the camera to automa�cally start recording once camera
is turned on. This feature will not work if no SD card is present.
AUDIO
You can turn ON/OFF the cameras ability to record audio.
SHARPNESS
You can increase the cameras sharpness level. We suggest leaving this
se�ng at 0 for best video quality.
PARKING WAKE
When this feature is turned ON, and the camera is turned OFF. When
mo�on is detected by camera, the camera will turn ON and record.
NOTE: Camera must have power for this feature to work properly.
DATE TAG
This feature allows you to turn ON/OFF the date being watermarked onto
your recorded footage.
G SENSOR
A G-Sensor is an accelerometer that registers values based on the amount
of force applied during an impact. When a pre-set value is reached this will
cause the recorded footage to be protected and moved into a folder that
cannot be overwri�en by any further footage you record. You can adjust
the sensi�vity of this feature.
BEEP SOUND
This will allow you to turn OFF/ON the beeping sound as you press the
camera's bu�ons.
DATE INPUT
Allows you to change the date and �me on the camera
AUTO OFF
This se�ng allows you to adjust the length of �me the camera will
remain ON, while not recording or being used.
LANGUAGE
Change what language your camera uses.
LIGHT FREQUENCY
If your located in North or South America, please use 60Hz. For Europe and
Asia, please use 50Hz.
Publicidad
Tabla de contenido
