Velleman CAMCOLVC2 Manual Del Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
• DO NOT use this product to violate privacy laws or perform other illegal
activities.
4.
Features
• very small digital video recorder camera
• recording on micro SD-card (not incl.)
• no flash memory built in
• only 2 operation switches
• audio and video recording
• comes with USB cable
5.
Overview
Refer to the illustration on page 2 of this manual.
A
hold switch
B
mini-SD card slot
C
USB port
D
camera lens
E
microphone
6.
Operation
• Slide a micro SD card (not incl.) in the micro SD slot [B], see the markings
on the housing for correct way. The recorder can not work without a card.
• Switch the camera on by moving the ON/OFF switch [F] to the ON-position
(up). The power LED [H] (blue) and the status LED [I] (pink) will turn on.
After a few seconds, the status LED [I] will switch off.
• When the hold switch [A] is in lock position (down), the record/stop button
[J] is disabled.
• To start recording, make sure the hold switch [A] is in the unlock position
(up). Press the record/stop button [J] to start recording. The status LED [I]
lights up (pink).
• To stop recording, press the record/stop button [J] again. The status LED
[I] switches off.
16/07/2009
CAMCOLVC2
F
ON/OFF switch
G
USB connection LED
H
power on LED
I
status LED
J
record/stop button
4
Rev. 01
©2009 Velleman nv

Publicidad

Tabla de contenido
loading

Tabla de contenido