EGO POWER NEXUS ESCAPE PAD1500E Manual Del Operador página 4

Use of an attachment not recommended or sold by the
EN
manufacturer may result in a risk of fire, electric shock,
or injury to persons.
Do not use a battery pack or appliance that is
damaged or modified. Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
When charging the battery, work in a well ventilated
area and do not restrict ventilation in any way.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not expose the battery pack to fire or excessive
temperature. Exposure to fire or temperature above
100°C may cause explosion.
Do not expose the power inverter to rain or wet
conditions. Water entering the power inverter will
increase the risk of electric shock.
The power inverter is not intended for any use other
than charging small (up to 4.2 Amp for two USB ports
combined) USB electronics or small (up to 150W) AC
devices. Any other use may result in damage.
Switch off the power inverter when not in use.
Use the power inverter only with specifically
designated battery packs. Use of any other battery
packs may create a risk of injury and fire.
Do not disassemble the power inverter, take it to a
qualified service person when service or repair is
required. Incorrect reassembly may result in a risk of
fire or electric shock.
Have your power inverter serviced by a qualified
repairperson using only identical replacement parts.
This will ensure that the safety of the power inverter is
maintained.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product
and possible injury.
Only for class II appliance.
Use only with batteries listed in fig. B
SAVE THESE INSTRUCTIONS!
4
56 VOLT POWER INVERTER — PAD1500E
SPECIFICATIONS
Input Voltage
56V
Range of rated values 37.8-58.8V
5V, Max.4.2A (two USB ports
USB Output
combined)
AC Output 220V-240V ~ 50Hz Max.150W
Optimum Charging
0°C-40°C
Temperature
Storage Temperature -20°C-70°C
Weight 0.53 kg
DESCRIPTION
KNOW YOUR POWER INVERTER (Fig. A)
1. Power Button
2. Handle
3. USB Port2
4. USB Port1
5. AC Port
6. Negative Electric Contacts
7. Spring Latch
8. Positive Electric Contacts
OPERATION
WARNING: This device is intended to be used
indoors only. Use the inverter in dry environment.
WARNING: Do not modify or attempt to repair the
power inverter except as indicated in the instructions for
use and care.
The power inverter provides two USB ports and one AC
port. The two USB ports combined supply a maximum of
5V DC, up to 4.2 A output to power small USB devices, like
your cell phone, MP3 player, etc. The AC port supplies a
220V-240V AC, max.150W output to power the small AC
devices, such as a laptop computer.
NOTE: Fully charge your EGO POWER+ battery pack before
first use. The battery should be charged in a location where
the temperature is greater than 5°C and less than 40°C.
1. Align the mounting slots on the power inverter with
the ribs on the battery pack, then move the power
inverter towards the battery pack until it snaps into
position (Fig. B).
NOTE: Make sure that the spring latch on the power
inverter snaps into place and the battery pack is secured
to the tool before beginning operation.