Morso 7800 Instrucciones De Instalación página 7

If the fresh air connection is to be fitted rearwards, the sheet steel panel on the rear of the
socket must be knocked out with careful small blows by the small "bridges" that retain the
panel.
The ceramic glass ring that serves as packing between the Fresh Air Box and the cast base
slab must be fitted to the Fresh Air Box, which is then screwed to the oven with the 2 screws
supplied.
On a Morsø 7900 fitted with an
open plinth or drawer solu-
tion, the fresh air connection
can only installed rearwards.
A heat screen is supplied with
these plinths, to be installed
at the same time as screwing
on the plinth (see sketch).
Before fitting the fresh air
box to these versions, the two
rectangular blocks in the heat
screen must be removed (see
sketch).
It is not possible to fit the fresh air system to the wall-hung version or ovens on a pedestal.
7