Safety Precautions; Grounding Instructions - Tennant 200 Manual De Operador Y Lista De Repuestos

SAFETY PRECAUTIONS

This machine is intended for commercial use. It is
designed to dry carpets, hard floors and upholstery in
an indoor environment and is not constructed for any
other use.
The following safety alert symbols are used
throughout this manual as indicated in their
description.
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following information signals potentially
dangerous conditions to the operator or equipment:
FOR SAFETY:
1. Do not operate machine:
– Unless trained and authorized.
– Unless operator manual is read and
understood.
– In flammable or explosive areas unless
designed for use in those areas.
– Unless cord is properly grounded.
– With damaged cord or plug.
– If not in proper operating condition.
– In outdoor areas.
– In standing water.
– With the use of an extension cord.
2. Before operating machine:
– Make sure all safety devices are in place
and operate properly.
3. When using machine:
– Do not place dryer where intake screens
or dryer snout may be obstructed.
– Never place foreign objects in dryer
snout.
– Do not pull machine by plug or cord.
– Do not pull cord around sharp edges or
corners.
– Do not close doors on cord.
– Do not unplug by pulling on cord.
200 (02–01)
Home Find... Go To..
– Do not stretch cord.
– Do not handle plug with wet hands.
– Keep cord away from heated surfaces.
– Never allow children to play on or around.
– Report machine damage or faulty
operation immediately.
4. Before leaving or servicing machine:
– Turn off machine.
– Unplug cord from wall outlet.
5. When servicing machine:
– Unplug cord from wall outlet.
– Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
– Use manufacturer supplied or approved
replacement parts.
WARNING: Hazardous Voltage. Shock or
electrocution can result. Unplug machine before
servicing.
WARNING: To reduce the risk of fire or
electrical shock, do not use this fan with any
solid–state speed control device.

GROUNDING INSTRUCTIONS

Machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electrical shock. This machine
is equipped with a cord having an
equipment–grounding conductor and grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local codes and ordinances.
3