Instrument Disposal; Technical Data - METRICA 61530 Manual Del Usuario

stwatches or metal parts)
- Hold the detector up in the air
- When the instrument is on, press the "3", "5" or "7" button
until the buzzer emits a "dididi" and the green light (1) lights
up: the calibration has been completed successfully
- The instrument reboots after 2 seconds and is ready to run
Remove debris or dirt with a soft, dry cloth, do not use detergents
or solvents.
In order not to affect the measuring function, in the sensor area

TECHNICAL DATA

Max scanning depth
Automatic switch-off after
Operating temperature:
Storage temperature:
Battery:
Working time:
Weight:
NOTE: Detection depth depends on material, size of the objects and structure conditions.
"8" either on the front or on the rear side of the instrument do
not apply decals / stickers or identification plates, especially if
made of metallic material.
Store and carry the measuring instrument only in the supplied
protective case.
Protect the instrument from humidity and direct sunlight.

INSTRUMENT DISPOSAL

Dispose of the product properly in accordance with the national
regulations in force in your country
Ferrous metal: 100mm
Non-ferrous metal: 80mm
Copper conductors (live): 50mm
Wood: 20mm
approx. 5 minutes
-10°C + 50°C
-20°C + 70°C
1x9V
approx. 6hours
kg 0.14
13