Protect The Envir Onment - Remington URBAN D1001URB Manual Del Usuario

ENGLISH
This product is fitted with a BS1363 plug fused at 13A. If the plug is unsuitable, it should be
disconnected and an appropriate plug fitted as detailed below. If it is necessary to replace
the plug fuse, use only fuses that are approved to BS1362, rated at 13A. If in doubt consult a
qualified electrician.
The wires in the mains lead are coloured in accordance with following code:
BLUE – NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked 'N' or
coloured BLACK. The wire which is coloured BROWN must be connected to the terminal
which is marked 'L' or coloured RED. Never connect either of the wires to the big EARTH
terminal marked 'E' or coloured GREEN or GREEN AND YELLOW.
Do not dispose the product in household waste at the end of its useful life. Disposal can
take place at the Remington
4
110443 REM IFU D1001URB_21L.indd GB_4
WIRING INSTRUCTIONS UK Plugs Only

PROTECT THE ENVIR ONMENT

®
Service Centre or appropiate collection sites.
For further information on recycling see www.remington-europe.com
24.06.11 16:54