Giagni IC-1W Manual Del Usuario

Deluxe
Wall Mounted
Ironing Center
Remove the ironing board assembly and all the parts from the cabinet.
The cabinet is mounted first, then the ironing board is installed inside.
Prior to installation, please check that you have all the parts. If you have any
missing or damaged parts, please do not take it back to the store. Please call
Giagni Customer Service and we will quickly get you the parts you need.
For assistance with missing parts, installation or technical questions,
or to purchase replacement Ironing Board Covers:
Call GIAGNI Toll-Free at 888-560-5222
or email us at info@giagni.com
Parts List:
1 - Cabinet
1 - Ironing Board Assembly
1 - Ironing Board Cover
1 - Hardware Box (See Contents)
To surface mount on the wall, you will need
To install recessed into the wall, you will also need
or
Model
IC-­‐1W
IC-­‐1WM
12/19/11
Hardware Box Contents
2 – Hinges
1 – Magnetic Catch with Plate
1 – Roll of Peel and Stick Trim
1 – Clothes Hook
16 – Round Head Screws (1/2" Long)
4 – Flat Head Screws (1/2" Long)
4 – Wall Screws (2" Long)
Choose Location
Choose a location near an outlet, where there is proper clearance per the diagrams below. You
may only need clearance in one direction. The door can be mounted to the cabinet on either side.
If it is unknown if there is plumbing or electrical inside the wall, use the surface mount option. For
recessed mounting, this product is designed to fit between two standard wood studs with 16"
spacing.
39-3/4"
65"
Surface Mounted
Recess Mounted
If it is unknown if there is plumbing or electrical
inside the wall, use the surface mount option.
Find your ideal height for your ironing board
Based on the room layout, decide whether you will mount the Ironing Center low on the wall
and have the board swing up, or mount it mid-wall and have the board swing down. Choose
the ideal height for the ironing board surface. Use the guide below to calculate how high off the
floor you should mount the Ironing Center. Mark the wall for the top of the cabinet.
M ounted o n L ower W all
Top of cabinet to floor:
Ironing Board Height + 13"
42-3/8"
47-3/8"
14-1/2"
43-3/4"
Mounted M id-­‐Wall
Top of cabinet to floor:
Ironing Board Height + 36-3/8"