Safety Precautions - Grizzly ERV 1801-37 ZV Traducción Del Manual De Instrucciones Original

GB
Cylinder width ..................................37 cm
Depth adjustment ............................5-way
(3/6/9/12 mm + transport position)
Volume collection bag..........................40 l
Weight (incl. accessories) ....approx. 13 kg
Acoustic pressure level
(L ) ................... 82 dB(A); K
pA
Sound power level (L
Measured ..94.5 dB(A); K
Guaranteed ..............................97 dB(A)
Vibration (a ) ............. 3.3 m/s
n
The noise and vibration values were
established by the standards and stipula-
tions listed in the Conformity Declaration.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
22
= 3 dB(A)
pA
)
wA
= 2.22 dB(A)
wA
; K=1.7 m/s
2

Safety precautions

This section covers the basic safe-
ty instructions when working with
this implement.
Symbols used in the manual
Warning symbols with in-
formation on damage and
injury prevention.
2
Instruction symbols (the
instruction is explained at
the place of the exclamation
mark) with information on
preventing damage.
Help symbols with informa-
tion on improving tool han-
dling.
Symbols on the implement
Caution!
These Instructions must be
read.
Danger of injury due to
flung-out material! Keep
bystanders well away from
the implement.
Danger of electric shock
if the power cable is dam-
aged! Always ensure that
the power cable is kept well
away from the implement
and its cutting tools.
Wear eye and ear protec-
tion.