Publicidad
Idiomas disponibles
Idiomas disponibles
LMUNTG Dual-Purpose Vehicle RFID Tag Headlamp Installation
For optimum performance, the RFID tag must be installed on the headlight lens or other suitable mounting location that is facing the RFID reader during
normal driving.
Reader
Choose a mounting location for the tag at least 2" (5 cm) from any materials containing metal and approximately 2.5" (6.4 cm) from the bottom refl ector.
Car Headlamp (front view)
Clearance Shown for Distance between Hood, Body Panel and Bumper
Min. 2"
(5 cm)
Car Headlamp (side view)
Clearance Shown for Distance between Headlamp Refl ector Housing
Tag Read
Zone
Best
Driver Side Reader Placement
Minimum 2" (5 cm)
Min. 2"
(5 cm)
Minimum 2.5" (6.4 cm)
Avoid
Avoid
Passenger Side Reader Placement
Reader
Tag Read
Zone
Best
Publicidad
