Correct Weighing - Seca 375 Manual De Instrucciones

– Align the scale by undoing the foot
screws. The air bubble in the spirit level
must be right in the centre of the circle.
– Ensure that only the feet of the scale are
in contact with the floor. The scale may
not be in contact at any other point.
5. Operation

Correct weighing

– With the scales empty, press the start
button.
, and
SE(A 88888
secutively in the display. The scale is
then automatically set to zero and ready
for use.
– If required, switch the weighing range
(see page 17).
– Place the baby on the scale.
– Read the weighing result off the digital
display.
– To switch off the scale, press the Start
key again.
If the scale is operated with a mains unit,
the symbol appears in the display.
16
appear con-
0. 0 00
seca 375:
seca 376: