ASROCK X58 Extreme6 Manual De Instrucciones página 20

Step3. Align and insert ASRock SLI_Bridge_2S Card to the goldfingers on each
graphics card. Make sure ASRock SLI_Bridge_2S Card is firmly in place.
ASRock SLI_Bridge_2S Card
Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI
connector of the graphics card that is inserted to PCIE1 slot.
2.5.1.2 Installing Three SLI 2.5.1.2 Installing Three SLI 2.5.1.2 Installing Three SLI 2.5.1.2 Installing Three SLI 2.5.1.2 Installing Three SLI
Step 1. Install the identical 3-Way SLI
certified because different types of graphics cards will not work together
properly. (Even the GPU chips version shall be the same.) Each graphics
card should have two goldfingers for the 3-Way SLI Bridge connector.
Insert one graphics card into PCIE1 slot, another graphics card to PCIE4
slot, and the other graphics card to PCIE5 slot. Make sure that the cards are
properly seated on the slots.
Two Goldfingers
Step2. Connect the auxiliary power source to the PCI Express graphics card.
Please make sure that both power connectors on the PCI Express graphics
card are connected. Repeat this step on the three graphics cards.
2 0 2 0 2 0
2 0 2 0
-Ready Graphics Cards -Ready Graphics Cards -Ready Graphics Cards -Ready Graphics Cards -Ready Graphics Cards
TM TM TM TM TM
TM
-ready graphics cards that are NVIDIA
ASRock X58 Extreme6 Motherboard
®