ASROCK X58 Extreme6 Manual De Instrucciones página 21

Step3. Align and insert ASRock 3-Way SLI-2S2S Bridge Card to the goldfingers on
each graphics card. Make sure ASRock 3-Way SLI-2S2S Bridge Card is
firmly in place.
ASRock 3-Way SLI-2S2S Bridge Card
Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI
connector of the graphics card that is inserted to PCIE1 slot.
2.5.2 Driver Installation and Setup 2.5.2 Driver Installation and Setup
2.5.2 Driver Installation and Setup 2.5.2 Driver Installation and Setup 2.5.2 Driver Installation and Setup
Install the graphics card drivers to your system. After that, you can enable the Multi-
Graphics Processing Unit (GPU) feature in the NVIDIA
Please follow the below procedures to enable the multi-GPU feature.
®
For Windows XP / XP 64-bit OS:
TM
(For SLI mode only)
A. Double-click NVIDIA Settings icon on your Windows
B. From the pop-up menu, select Set SLI and PhysX configuration. In
Set PhysX GPU acceleration item, please select Enabled. In Select
an SLI configuration item, please select Enable SLI. And click Apply.
ASRock X58 Extreme6 Motherboard
® nView system tray utility.
® taskbar.
2 1 2 1 2 1
2 1 2 1