Package Contents - Gemmy airblown 71516 Información De Seguridad Para La Instalación

Package Contents

A
x1
Assembly Instructions
1
A
Ensure the four clips on the bottom
of the fabric of the inflatable (A) are
attached to the plastic legs on the
base of the intlatable.
4
A
Plug in the inflatable (A) into an outlet
or other power source to inflate.
7
D
Drive the stakes (D) into ground at a
45-degree angle.
B
C
x4 x4
2
Ensure that the air intake on the
inflatable (A) unit is clear of fabric and
other obstructions and that the zipper
is fully closed. Some inflatables have
more than one zipper.
5
Once fully inflated, clip the nylon tethers
(C) to each of the attached nylon loops
on the side of the inflatable (A).
8
For maximum stability bring tether down
to a 45-degree angle from the inflatable
as shown in the illustration. In order to
achieve this you may need to wrap the
excess tether around the top of the stake.
D
x4
A 3
Turn the inflatable (A) upright and insert
four base stakes (B) through the holes
of the plastic legs into the ground.
6
A
C
Using the loop at the end of the tether
(C), fasten the tehters to the tether
stakes(D).
9
45°
Do's and Don'ts
1. Do check your inflatable daily and adjust
2. Do not attempt to operate your inflatable
3. Do not unplug by pulling on cord.
Visit
WWW.GEMMY.COM
©2020 GEMMY INDUSTRIES CORP.
117 WRANGLER DRIVE. SUITE 100
COPPELL, TX 75019 U.S.A.
1 (800) 274-6717
MADE IN CHINA / PRINTED IN CHINA
E
x1
A
B
C
D
to stand up straight.
in unusually strong winds.(see caution)
For faster deflation, unzip zipper after
unplugging plug.
for more information.