Troubleshooting - Pulmic INDUSTRIAL 35 Guia De Inicio Rapido

PULMIC INDUSTRIAL 35
• Never operate with strong acids, strong bases, or flammable liquids.
• Never fill the sprayer with hot liquids (max temp. = 176°F) or gasoline.
• Do not leave the sprayer in reach of children or persons not qualified to handle it in a proper manner.
• Keep people (especially children) and animals in a prudent safe distance.
• In case of poisoning, do not leave the affected person alone. Flush with much water affected areas and remove
contaminated clothing. Seek immediate medical attention to the product label.
• Always use PULMIC original replacement parts.
When using chemicals, always wear protective clothing, respiratory protection mask,
gloves, eye protection, etc.
Do not dispose of lithium-ion battery with household waste; recycle where facilities exist.

TROUBLESHOOTING

PROBLEM POSSIBLE REASON (S)
Battery is not charged.
Sprayer does not turn on.
Loose wire.
Input and/or output hose(s)
Leaks from tank area. have a loose connection with
the pump.
Loose / damaged / broken
seal(s)
Leaks from gun/nozzle area.
Ball valve inside gun assembly
is defective
Not rinsing tank / pump / hose
Clogged pump / hose / gun /
/ gun / nozzle(s) with cleaning
wand / nozzle.
solution or water after use.
Random part breaks. Wear and tear.
Pump runs constantly or Pressure switch adjustment is
intermittently. needed on the pump.
EN USER'S MANUAL
SOLUTION
Charge battery.
Contact us for technical support.
Remove screws and remove the
plastic covering to expose pump.
Loosen clamps on both hoses,
position hose closer to pump and
re-tighten hose clamp.
Inspect all seals and replace if
necessary.
Contact us for technical support /
warranty info.
Rinse sprayer throughly with
warm, soapy water after each use.
Wipe down filter inside tank.
Contact us for warranty coverage.
Contact us for technical support.
- 10 -
PULMIC INDUSTRIAL 35
WARRANTY
This sprayer has 1 year warranty from date of purchase. It has been carefully manufactured and tested before
delivery. Save the invoice or receipt as proof of purchase.
The warranty only covers defects in manufacturing and material, but does not cover shipping damage, parts subject
to wear and damage during use fragile components such as battery, valves, membranes, motor, nozzles, gaskets,
etc.
This product has been designed for use in crop protection product application diluted in water for the
manufacturers recommended percentages thereof.
In case of abusive and improper handling, use of force, CONTRARY use and open or improperly manipulate the
spray by unauthorized persons, the warranty becomes invalid. This warranty does not affect your statutory rights in
any way.
By the mere fact of a warranty do not imply an extension of its period of validity. This applies also to replaced or
repaired. Any damage and defects extant on buying the product, shall be reported immediately or no later than two
days after the purchase date. After the warranty period, repairs will have to pay.
Activate warranty through our website:
www.gruposanz.es/en/warranty-activation
Where to find the serial number?
1) In the packaging 2) In the battery 3) In the compartment / battery holder
EN USER'S MANUAL
- 11 -