Getting Started; App Control - RuarkAudio R3 Compact Manual De Instrucciones

Getting started

1 Insert batteries into remote control
2 Connect the aerial
Fit the telescopic aerial to the DAB/FM antenna socket
on the back of your R3 and gently tighten it using the
supplied spanner.
3 Connect to AC mains power
Fit the correct plug for your region to the mains adapter;
it will "click" into place. Connect the mains adapter to the
DC power socket on the back of your R3, then connect it
to the mains socket.
4 Switch on
Press to turn the R3 on.
5 Select language
Rotate the CONTROL KNOB until your preferred choice
is highlighted, then press SELECT.
6 Setup wizard
Follow the setup wizard to configure the clock and
connect to your network.
To start the setup wizard, rotate the CONTROL KNOB to
highlight YES and then press the knob to SELECT.
If you choose NO, your R3 will start without configuring
the time/date and network settings.
7 Select a source
When your setup is complete, your R3 will display
a menu with a list of the available sources. Use the
CONTROL KNOB to choose a source and press
SELECT.
8 Enjoy your music!

App control

You can also control your R3 using UNDOK. Find it on
the Apple/Android app store.
For more information visit www.ruarkaudio.com/app