Beafon VISITOR 1V Manual De Instrucciones página 26

Install
eafon_Smarthome_VISITOR 1V_Manual_GESAMT.indd 26 eafon_Smarthome_VISITOR 1V_Manual_GESAMT.indd 26
1. Dismount the bracket by
pushing from the back of your
doorbell. Please remove the
insulation film in the battery cell.
2. Bracket installation:
Mount the bracket on the wall
with screws & anchors or the
double-side adhesive tape.
3. (Optional) The nameplate
holder can be mounted on the top
rear/bottom rearof the bracket,
prior to bracket installation.
26
14.12.20 10:25 14.12.20 10:25