PAIR VIA BEAFON HOME APP
Pair via App
Pair via App
Pair via App
Pair via App
Step 1
Click the „
Step 2
Click the „RESET" button, the blue light blinks and enter the configuration mode.
Step 3
Enter the „Settings" of your App, press „Bell Setting".
Step 4
Press „Bind" button, the device will be connected in about 2s.
Step 5
Select the ringtone, adjust the volume.
Step 6
Complete the configuration,the blue light is on.
Note:
If the configuration fails,please press the „RESET' button for 5 seconds
to reset your chime and click the „RESET" button.then add it again.
eafon_Smarthome_VISITOR 1V_Manual_GESAMT.indd 33
eafon_Smarthome_VISITOR 1V_Manual_GESAMT.indd 33
•••
" at the preview interface when you have added your doorbell.
33
14.12.20 10:25
14.12.20 10:25