Functional Description; Assembly; Operation - Porter Cable 125 Manual De Instrucciones

FOREWORD
The Porter Cable Model 125 Plane is designed for removing material up to
3-1/4" wide by 1/8" deep, and for making rabbet cuts up to 7/8" deep. The
plane is equipped with a cutter-head containing two reversible, solid carbide
blades.
NOTE: This tool is shipped assembled with the exception of the bevel
fence. Assembly time is approximately five minutes and no tools
are required.
BEVEL FENCE
A bevel fence is standard equipment. To attach the fence to the plane:
DISCONNECT TOOL FROM POWER SOURCE.
1. Turn the knob (A) Fig. 1 counter-
clockwise 4 or 5 turns.
2. Slide the fence arm (B) Fig. 1
through the rectangular slot (C) in
the plane housing.
3. Tighten the knob (A) Fig. 1 to hold
the fence.
TO START AND STOP PLANE
Make sure that the
switch is "OFF" and
power circuit voltage
is the same as that
shown on the specifi-
cation plate.
Depress and hold the lock button
(A) Fig. 2 while squeezing the trigger
switch (B) Fig. 2 to start the motor.
Release the trigger switch to stop the
motor.

FUNCTIONAL DESCRIPTION

ASSEMBLY

OPERATION

A
B
10
C
B
Fig. 1
A
Fig. 2