Geba Tronic Cody Universal 2 Manual Del Usuario página 17

After you have made yourself familiar with the functions of the
appliance, please program your personal mastercode as well as
a pass code with which you replace the pass code which is
located on the memory place 00. Only by this your Cody
Universal 2 is protected against manipulation!
TIPTOMATIC:
The Cody Universal 2 has two potential free relay outputs enabling
direct control of a tubular drive or an industrial door drive unit or
similar instruments. After having entered a valid pass code the user
can, within a period of 60 seconds, trigger the installed drive unit in
the dead man's mode with the arrow keys UP
The relay is activated only as long as the arrow keys are pushed. The
two relays are interlocked against each other, so it is not possible that
both relays can be switched at the same time. After expiration of the
of 60 seconds the Cody Universal 2 locks automatically. This
function, however, can be interrupted prior to the expiration of the 60
seconds, by pressing the
Lock-out function:
If the lock-out function is activated, the Cody Universal 3
automatically blocks any input for a set period after the input of a
wrong pass code which is signalled with a (3 beeps) sound signal.
You can freely program the lock-out time according to your
requriments.
The end of the lock-out time is signalled by a long sound signal.
ATTENTION!!!
=
version
Duoline
button.
=
and DOWN .