Technical Specifications - Whirlpool 3XLGR5437 Instrucciones De Instalación

Moving dryer to a new location?
Check with your gas supplier or dealer to confirm that your dryer is equipped with
the correct burner for the particular type of gas in your new location. Burner
information is specified on the model/serial rating plate.
Shut off electrical
supply to dryer.
Unplug power
supply cord and tape
it securely to dryer.
Shut off gas supply
valve in the gas
supply line.
Disconnect gas
fittings from dryer and
cap gas supply line.
Tape end of dryer gas
pipe.
Slide dryer onto cardboard or hardboard
before moving it across the floor to
prevent damaging floor covering.

Technical specifications

230-240V -50 Hz 1ph 3A max. IPX4 Clothes capacity: 9.1 kg max.
Factory set for NATURAL GAS: Injector size: 2.2 mm
European Country:
European Category:
Supply pressure (G20):
Factory adjusted pressure:
With LPG conversion kit: Injector size: 1.25 mm
European Country:
European Category:
Butane supply pressure (G30):
Adjusted pressure:
Propane supply pressure (G31):
Adjusted pressure:
NOTE: Conversion kit : From Natural Gas to LP Gas : Whirlpool Part No. 279918.
Manufacturer : Whirlpool Corporation, Benton Harbor, Michigan 49022, USA.
Part No. 8528097
© 2001 Whirlpool Corporation
Tape top
to cabinet.
Tape door to
front panel.
Turn leveling
legs all the
way in.
Heat input gross: 5.9 kW
GB, ES, PT
II2H3+
20 mbar
7.4 mbar
Heat input gross: 5.7 kW
GB, ES, PT
II2H3+
28-30 mbar
N/A
37 mbar
N/A
Benton Harbor, Michigan 49022, U.S.A.
GR, IT
II2H3B/P
20 mbar
7.4 mbar
GR, IT
II2H3B/P
30 mbar
N/A
30 mbar
N/A
Printed in U.S.A.