Safety Note; Installation Instructions - Vision-EL 80104 Instrucciones

®

SAFETY NOTE

• Keep this note as long as you use the device.
• The assembly and the maintenance must be done by qualified people who can intervene on products that must be manually connect to 230V current
• Before any assembly, cut the power supply
• First of all connect the ground wire.
• The flexible outer cable of this lamp can not be replaced; if the cable is damaged, the lamp must be destroyed.
• The light source of this lamp is not replaceable ; when the light source reaches its end of life, the entire lamp must be replaced.
• The terminal block isn't included ; the installation may requiere the advice of a qualified person.
• Do not throw LED lamps on their end of life.
Follow the instructions on www.recylum.fr
Model 80105 (6W)
Voltage AC100~240V
Power 6W
Color temperature 2700K – 6500K
Luminous flow 420Lm
Luminous efficiency 70LM/m
CRI >80
Power factor >0.5
Angle 15°
IP IP655
RF 2.4G remote control, 16 million color changing, saturation control.
Products equipped with the function retransmit signals 4 zones of the remote control at maximum 30m, including when an area is o by the remote control.
Number Dynamic Mode
1
Gradual change of colors
2
Progressive change of white light
3
RGB progressive change
4
Seven colors to choose
5
Random change
Progressive change of red light
6
+ 3 ashes
Progressive change of green light
7
+ 3 ashes
Progressive change of blue light
8
+ 3 ashes
Progressive change of white light
9
+ 3 ashes
5. Remote control instruction
Note: Compatible with the remote control below (sold separately).
Synchronize and Desynchronize (remote control 7649)
Synchronize: Turn off the power and turn it back on for 5 seconds, press the "I" key three times for 3 seconds, the light will blink 3 times, the projector will be ready for operation,
Out of sync: Power off and on again 5 seconds, press 5 times "I" in 3 seconds, the light will flash 10 times, then the projector will be out of sync.
Ce produit est garanti contre tout défaut de fabrication pendant une durée de 2 ans / This product is guaranteed against any manufacturing defect during a duration of 2 years
Este producto es garantizado contra todo defecto de fabricación durante una duración de 2 años / Questo prodotto è garantito contro ogni difetto di fabbricazione durante una durata di 2 anni
NOTICE - INSTRUCTIONS - INSTRUCCIONES - AVVISO - BEKANNTMACHUNG
80104 (9W)
80106 (15W)
AC100~240V
15W
2700K – 6500K
1200Lm
80LM/m
>80
>0.5
15°
IP65
Brightness Speed Saturation
Adjustable
No Adjustable
Adjustable Adjustable Adjustable
No Adjustable
1. Long press "Master OFF" or "Zone OFF" to night light mode.
2. Long press "Master ON" or "Zone ON" to white light mode(100% brightness).
3. Touch "Color Ring" to change the colors.
4. Under white light mode, touch "Speed+" and "Speed-" to change color temperature.
5. Under color light mode, touch "Speed+" and "Speed-" to change color saturation.
6. Under Dynamic mode, touch "Speed+" and "Speed-" to change speed.
Link: First power o , then power on, within 3 seconds touch any of the Zone-ON button one times shortly, the
link is done when you see the light blinks 3 times with green color, otherwise try again later.
Unlink: First power o , then power on, within 3 seconds long touch the linked Zone-ON button or the
Master-ON button ,the unlink is done when you see the light blinks 10 times with red color, otherwise try
again later.
Dieses Produkt ist gegen jeden Fabrikationsfehler während einer Dauer von 2 Jahren garantiert
80105 (6W)

4. Installation instructions

Marron Bleu Jaune-Vert
AC100~240V
( L ) ( N ) ( )
Marron Bleu Jaune-Vert
EMC
960°
80106 (15W)
Φ35mm
170mm 51mm
Customers service
MIIDEX FRANCE
1 rue Isaac Newton
31830 Plaisance Du Touch
FRANCE
www.miidex.com