Battery Installation / Replacement - Bushnell 100400 Manual De Instrucciones

Ocultar thumbs Ver también para 100400:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
ENGLISH
INTRODUCTION
Your Bushnell HD Light uses innovative and patented technology to
produce a perfectly uniform square beam of high definition light. The
HD Light is machined from aircraft quality aluminum, o-ring sealed and
waterproof. Whereas standard incandescent and LED lights produce
circular patterns of light that are non-uniform irregular "blobs" of light,
the HD High Definition Light provides 165 lumens of consistent light
intensity from center to edge (model# 100400BC=200 lumens).
HD ADVANTAGES
• HD allows for cleaner finite reading and makes objects stand out
from their background
• Makes locating lost objects much easier by using the "quadrant /
zone search method"
• Prevents shadows unlike conventional lights

BATTERY INSTALLATION / REPLACEMENT

Remove the end cap by rotating counter clock-wise.
Insert both batteries positive end first and replace end cap.
If batteries are not inserted correctly, the unit will not light.
OPERATION
To power on the light, first depress the power switch located on the
end cap. This will activate the translucent "B". Next, simply press the
black button located near the objective head. The black button can
be pressed to move from light settings, ON, Safety Strobe, and OFF.
Once you are finished using the light, simply depress the power switch
located on the end cap. To turn it back on, press the end cap, and then
the black button.
Find-Me™ Feature and Battery Life Indicator (Glowing Button on
end cap)
The glowing button is a multi-functional feature serving as a Find-Me™
feature and Battery Life Indicator. Find-Me™ feature is especially
handy for locating the flashlight in a dark area (i.e. tent, back-pack
etc). Battery Life Indicator - When the
life is sufficient for operation. When the
will provide approximately another 10 minutes before needing to be
replaced with fresh batteries.
WARNING:
Because the HD Light is a high light output flashlight, it can reach
high temperatures. Keep away from children. Use Caution
when handling.
MAINTENANCE
• Gently blow away any dust or debris on the lens (or use a soft lens
brush). To remove dirt or fingerprints, clean with a soft cotton cloth,
rubbing in a circular motion. Use of a coarse cloth or unnecessary
rubbing may scratch the lens surface and eventually cause permanent
damage. For a more thorough cleaning, photographic lens tissue and
photographic-type lens cleaning fluid or isopropyl alcohol may be
used. Always apply the fluid to the cleaning cloth - never directly on
the lens.
• Remove the batteries if the flashlight is being stored for longer than
two months.
2
button is Green, the battery
button is Red, the battery life

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

100400c100400bc

Tabla de contenido