HoMedics FMS-352HJ-BL Manual De Instrucciones E Información De Garantía página 5

KNEAD INTENSITY BUTTON
1. Pressing the "KNEAD" intensity
massaging mechanism (Fig. 4).
2. When first turned on, "KNEAD" intensity will begin in the lowest setting, with
button illuminated dull blue.
3. Pressing the "KNEAD"
Fig. 4
medium, indicated by a brighter blue.
4. Pressing the "KNEAD"
indicated by the brightest blue.
5. Pressing the "KNEAD"
setting.
HEAT BUTTON
1. To activate soothing heat, first select "AIR" or "KNEAD. " Then press the "HEAT"
button, and it will illuminate red (Fig. 5).
2. To turn heat off, press the
NOTE: For your safety, heat can only be turned on if an air and/or knead program is selected.
Fig. 5
When finished, turn the unit off and unplug.
MAINTENANCE
TO STORE
Place massager in its box or in a cool, dry place. Avoid contact with sharp edges or
pointed objects. To avoid breakage, DO NOT wrap the power cord around the unit. DO
NOT hang the unit by the power cord.
TO CLEAN THE MASSAGER
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp
sponge. NEVER allow water or any other liquids to come into contact with the unit.
• DO NOT immerse in any liquid to clean.
• NEVER use abrasive cleaners, brushes, or strong chemicals that may or may not be
flammable and/or damaging to the product to clean.
• DO NOT attempt to repair the massager. There are no user-serviceable parts. For
service, contact Consumer Relations at the number listed in the Warranty section.
TO CLEAN THE WASHABLE LINERS
Unzip and remove the washable liners. Hand wash only with cold water and a mild
detergent. Lay flat to dry.
• DO NOT bleach.
• DO NOT iron.
• DO NOT dry clean.
button will allow you to adjust the intensity of the
button again will change the massage intensity to
button a third time will change the intensity to high,
button once more will return the intensity to its lowest
button again and the red light will turn off.
5