WaterLink Spin Touch DW 3585 Manual De Usuario página 13

Cloth Wipe
Mobile Bluetooth Printer
WaterLink Spin Touch
®
WaterLink Spin Touch
®
For available WaterLink
WARNING: only use the USB cable and wall adapter that are supplied with the kit. Make no
substitutions.
SPECIFICATIONS
Instrument Type
Wavelengths
(interference filters)
Display
Wavelength Accuracy
Wavelength Bandwidth
Photometric Range
Photometric Precision
Photometric Accuracy
Sample Chamber
Light Source
Detectors
Pre-Programmed Tests
Languages
Temperature
Operation Humidity Range
Communication
Calibration
Firmware
Software
Power Requirements
Battery Type
Minimum Capacity
Charge Life
Battery Life
Full Charge
Water Resistance
Electrical Rating
DW Manual
®
DW Quick Guide
®
Spin Touch DW reagent disks, see page 13.
® ®
Centrifugal Fluidics Photometer
390 nm, 428 nm, 470 nm, 525 nm, 568 nm, 635 nm
Color Capacitive Touchscreen, 3.5 in, 320 x 240 pixel resolution
±2 nm
10 typical
-2 to 2 AU
±0.01 AU at 1.0 AU
±0.01 AU at 1.0 AU
Accepts prefilled disk
6 LEDS
6 silicon photodiodes
Yes, with automatic wavelength selection
English, French, Spanish, German, Dutch, Swedish, Portuguese,
Italian, Chinese, Turkish
Operation: 0-50 °C; storage – 40-60 °C
0- 90 % RH, non-condensing
USB-C, Bluetooth low energy technology (BLE)
Factory set, field calibration via internet connection
Internet updateable (New Test, New Test Calibrations, etc.)
Android & iOS Apps, WaterLink® Solutions, WaterLink® Connect 2
USB wall adapter, USB computer connection or internal lithium
ion rechargeable battery
Lithium ion
12 V/2.6 AH
Approximately 150 tests
Approximately 500 charges
10-12 hours
Rubber over-molded base, rubber USB Port Plug, gasketed
display and hinge.
Rated voltage (5V), Rated power of input current (1.6 A) at USB C
3580-WIPE
5-0066
3585-MN
3585-QG
13