Genius MAXFIGHTER Manual De Instrucciones página 2

Action Block
8 Direction Control Block
Functional Selection Block
LED Indication Block
Setting up the turbo function of a fire button
1. Press and hold one or several of the fire buttons (L1, L2, R1, R2, □, Χ, △, and Ο). The turbo
functions of the fire buttons are ready to be activated. Then, press the Turbo button.
2. The Turbo LED should turn on. The turbo functions of the pressed fire buttons are activated.
To clear the turbo function of a fire button
1. Press and hold one or several of the fire buttons (L1, L2, R1, R2, □, Χ, △, and Ο). The turbo
functions of the fire buttons are ready to be cleared. Then, press the Turbo button.
2. The Turbo LED should turn off. The turbo functions of the pressed fire buttons are cleared.
3. The Turbo LED will flash when a fire button with turbo function set is pressed.
Four Main Blocks
Fire Button: L1, L2, R1, R2 , □, Χ, △, and Ο buttons.
Digital Shift Stick is used to control direction of movement. There are
eight directions, which are up, down, left, right, up left, up right, down
left, and down right.
Start Button: Use Start button to start a game.
Select Button: Use Select button to select a highlight item.
Slow: Use Slow button to switch between normal operation speed
mode and slow speed controller modes. Switching between two modes
will not change the setting for each fire button, which is previously set by
Turbo buttons.
Turbo Button: Use Turbo button to activate the turbo function of each
fire button.
Select LED: If Select button is pressed, the Select LED should be lit.
Select LED will be off when the Select button is released.
Slow LED: In Slow operation mode, the Slow LED should light up.
Turbo LED: If the turbo function of an individual fire button (L1, L2, R1,
R2, □, Χ, △, and Ο) is activated and this fire button is pressed, the
Turbo LED should flash.
1
ENGLISH