Turn On The Power Switch; How To Use - Steren CAU-260 Manual De Instrucciones

2.3 Turn on the power switch

1. Set the temperature control knob to the desired
temperature.
2. Turn on the power switch, the LED will blink on
and off when the tip temperature reaches the set
temperature. The tip is now ready to perform
soldering work.
The soldering iron must be placed in the iron
holder when not in use.

2.4 How to use

If you use a wrong type of solder you could damage the device to be soldered.
1. Clean the surface where you'll make unions.
2. When the temperature stabilizes, apply new
solder to the tip.
3. Apply the solder using the tip on the connections
that you want to join. The solder will melt on the
object.
5