Adjust The Temperature - Steren CAU-265 Manual De Instrucciones

Adjust the temperature

1. Turn the station on. The indicator
LED lights in green color.
600
300
3. Watch the indicator LED, when
start to change from green to red, it
means the soldering is in the
required temperature.
Calibration
You don't need to calibrate the equipment before fi rst use; however,
you should calibrate it after to change the tip or the heating element.
1. Connect the soldering to the DIN connector.
2- Rotate the control knob until 400°C (750 °F) and turn on the station.
350 700
40
600
600
2. Rotate the control knob until you
reach the desired temperature.
350 700
350 700
400
400
19