Zagg Speaker Case Manual De Instrucciones página 5

To charge your phone using the speaker battery:
1. Connect the USB end of your charging cable to the USB port.
2. Connect the other end of your charging cable to the appropriate
port on your device. The Zagg Speaker Case will automatically
begin charging; if it does not, press the Zagg triangle on the
battery. Note: The Zagg Speaker Case can charge devices that
use either micro USB or Lightning® cables.
3. The LEDs above the power button will light according to how
much power the battery has. When these lights turn off, you have
used the available power and must charge it.
4. Disconnect your charging cable and enjoy your extra talk and
play time.
The battery indicator:
The triangle battery indicator button lets you quickly and easily
see how much power your speaker battery has left. Simply press
the triangle above the play/pause button and the LEDs will light
according to how much power the speaker battery has.
• Four lights indicate a full battery.
• Three lights indicate more than half the battery life remaining.
• Two lights indicate less than half the battery life remaining.
• One light indicates low battery level. Consider recharging your
Speaker Case.
4